DC-23 Vibration Analyzer

DC-23 Vibration Analyzer
DC-23 Vibration Analyzer
DC-23 Vibration Analyzer
DC-23 Vibration Analyzer
DC-23 Vibration Analyzer - the 4th generation dual channel vibration analyzer with synchronous channels.

It is used for vibration analysis including levels, auto-, envelope-, cross-spectra measurements, orbits for condition monitoring, diagnostics, rotor balancing.

The DC-23 measures all the parameters simultaneously for two channels and from one time domain signal record. Is makes measurements much faster and more reliable for diagnostics and machine fault analysis.

Portable instruments
Diagnostics, Balancing
1,05 kg
143х194х39 mm
IP 65
Number of channels
2 parallel
Working time
8 hours, not less
  • High resolution color screen and modern user friendly interface.
  • Wide range of vibration analysis functions allows precise diagnostics of machine condition and condition based maintenance.
  • Advanced technical specifications - frequency range up to 51 kHz, frequency resolution up to 51000 lines and dynamic range exceeding 100dB by vibration signal allow diagnostics of both slow an fast rotating machines
  • Alarm levels can be set for each measurement point for each measurement that allows in-field results in condition monitoring.
  • Defect frequencies can be displayed on spectra allowing in-field condition diagnostics.
  • Balancing fo up to 4 planes machines. Field balancing in own supports..
  • Run-in\coast down application to analyse amplitude-phase-frequency responce.
  • Shock application for analysis of resonances in the structures.

  • Acceleration, velocity, displacement, voltage, electrical current, rotation speed
Measurement types:
  • Overall level, envelope spectrum, autospectrum, amplitude\phase, cross spectrum, orbits, curtosis, constant percentage bandwidth spectrum, time signal, envelope time signal
  • RMS, peak, peak-peak, peak-factor
Number of channels:
  • 2 channels parallel, synchronous, 1 tacho
Frequency range for vibration:
  • from 0,5 upto 51 200 Hz
Frequency resolution:
  • from 400 up to 51 200 lines
Vibration dynamic range in spectra:
  • 100 dB, not less
Rotation speed range:
  • from 2 up to 1000 Hz (from 120 up to 60 000 RPM)
Phase measurement range
  • from 0 up to 360 degrees
Application firmware:
  • Run-in\coast  down, Balancing, Recorder, Schock, Vector calculator
  • 1,05kg
  • 142.6 х 194 х 38.6 mm
  • IP65
Operation temperature range:
  • from -20 up to 50 С
Operation time from batteries:
  • 8 hours, not less
RAM/FLASH storage:
  • 1Gb/4Gb
Basic set:

Vibration Analyzer DC-23 (display module)
Accelerometer - 2 pcs.
Magnet for accelerometer - 2 pcs.
Cables for accelerometer - 4 pcs.
Tacho probe
Cable for tacho - 2 pcs.
Holder for tacho
Interface cable
USB to Ethernet adapter
Protective case
Flash card with software
Carring case
DREAM software for vibration analyzer

*The set may differ depending on the customer request